VERITAS 5150 Hardware Service Procedure page 3

Warning: Swap one power cable at a time only. If you need to remove both power cables, make
sure that the appliance is turned off before you proceed.
Installing the replacement power cable
Use the following procedure to install the replacement power cable.
To install the replacement power cable
1 Remove the replacement power cable from any wrapping.
2 Ensure that the AC power supply input for the appliance is within one of these ranges:
• 110 VAC at 2.5 A
• 220 VAC at 1.3 A
3 On the appliance, connect the power cord to the power supply socket.
Connect the other end of the cord to the appropriate AC power source.
The LED on the power supply should turn on and blink green.
QRB # 303: Replacing a power cable
3