Tools Required; Remove Base From Packaging - CYBEX V Series Assembly Instructions Manual

Note: The hardware packs are numbered. Follow this order during the assembly procedure.
Note: This product does not use hardware pack 7.

Tools Required

• Phillips screwdriver
• 5 mm Allen wrench
• 10 mm Socket wrench
• 13 mm Socket wrench
• 14 mm Socket wrench

Remove Base from Packaging

1. Remove screws securing shrouds to base assembly using a Phillips screwdriver.
2. Cut cable ties securing base assembly to packaging using a scissors.
• 15 mm Pedal wrench
• 17 mm Open end wrench
• Rubber mallet
• Scissors
Item
1
2
Screw, M4 X16mm Phillips Pan
3
Page 14 of 26
Description
Shrouds
Base Assembly
Head
Qty
2
1
12