Sound Adjustment - LG LAC-M6500R Owner's Manual

Car cd/mp3/wma receiver
Table of Contents

Advertisement

SOUND Adjustment

Using the EQ (Equalizer)
The equalizer lets you adjust the equalization to match car interior
acoustic characteristics as desired.
There are 7 stored equalizer curves which you can easily recall at
any time.
Here is a list of the equalizer curves:
• EQ POP : Reproduces the acoustics of pop music.
• EQ CLASSIC : Reproduces the acoustics of orchestral music.
• EQ ROCK : Reproduces the acoustics of rock music.
• EQ JAZZ : Reproduces the acoustics of jazz music.
• EQ VOCAL: Reproduces the acoustics of vocal music.
• EQ USER 1 : Selects an initial user mode.
• EQ USER 2 : Selects an initial user mode.
1. Press EQ/XDSS on the front panel to select the equalizer.
2. Press EQ/XDSS repeatedly to select among the following
equalizer.
Pop → Classic → Rock → Jazz → Vocal → User 1
→ User 2 → Flat(EQ OFF) → Pop....
MUTE
1. Press MUTE/POWER [POWER/MUTE (
2. To cancel it press MUTE/POWER [POWER/MUTE (
XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS button to reinforce treble, bass and mid-
dle.
XDSS off (No display) → XDSS → XDSS+...
SELECTION (SEL) Button
VOL
Increase the volume level.
BAS
Increase the bass level.
MID
Increase the Middle level.
TRB
Increase the Treble level.
BAL
Decrease the level of the left speaker(s). Decrease the level of the right speaker(s).
FAD
Decrease the level of the front speaker(s). Decrease the level of the rear speaker(s).
1. WAY
1.
Select the USER EQ1, USER EQ2 or EQ OFF using the EQ/XDSS button
2.
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, bass, middle treble, balance and fader. The mode indicator
lights up in the following order.
3.
Turn left or right CONTROL UP/DOWN (or press VOLUME (
remote control) to adjust the sound quality.
2. WAY
1.
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, balance and fader. The mode indicator lights up in the fol-
lowing order.
)] to cut the sound.
)] again.
2.
Turn left or right CONTROL UP/DOWN (or press VOLUME (
remote control) to adjust the sound quality.
NOTE
The unit can adjust the bass, middle and treble in the USER EQ1,
USER EQ2 or EQ OFF.
Basic Operation
Turn right
Turn left
Decrease the volume level.
Decrease the bass level.
Decrease the Middle level.
Decrease the Treble level.
BAS
VOL
MID
TRB
BAL
VOL
BAL
FAD
FAD
/
) on the
/
) on the
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents