Page 1
LAC-M0510R_ENG_LGEMC-MFL37340958 Car CD/MP3 Receiver OWNER’S MANUAL MODEL : LAC-M0510R Please read this instruction booklet carefully and completely before connecting, operating or adjusting this product.
Caution: Protect this product from moisture. 2006/95/EEC. European representative : Caution: If the battery is disconnected or discharged, the preset LG Electronics Service Europe B.V. Veluwezoom 15, 1327 memory will be erased and must be reprogrammed. AE Almere, The Netherlands (Tel : +31-036-547-8940)
Before Use To ensure proper use of this product, please read this owner’s Notes on Discs manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the disc by the Symbols Used in this Manual edges so that fingerprints do not get on the surface.
Before Use Protecting your unit from theft Attaching the front panel The front panel can be detached from the main body and stored in the protective case provided to discourage theft. 1. Press RELEASE ( ) to open the front panel. RELEASE ( Align the left side of the panel with the stopper, and then push the right side or the panel into the unit until it clicks.
Installation Basic Installation Bend the claws according to Before installing, make sure that the ignition-switch is set to OFF and remove the thickness of the the car battery terminal to avoid short-circuiting. dashboard 1. Remove the existing receiver unit. 2. Make the necessary connections. 3.
Connections Connecting to the Car Before connecting, make sure that the ignition switch is set to OFF, and remove the battery terminal to avoid short circuits. 1 GND (BLACK) 2 PHONE (ORANGE) 3 DIMMER (PINK) DIMMER SWITCH 4 TO IGNITION (RED) IGNITION SWITCH 5 TO BATTERY.
Page 9
Connections Connecting to the Car From antenna Speaker Connections To the wiring of vehicle Colors of leads 1 BLACK : This lead is for the Ground connection. 2 ORANGE : This lead is for the phone line connection. FRONT REAR 3 PINK : This lead is for the Dimmer line connection.
Basic Operation Turning the unit on Adjusting the volume Press PWR/MUTE or any other button on the front panel. Use VOLUME to adjust the sound level. Press VOLUME (VOL+/-) button on the front panel to increase or Turning the unit off decrease the volume.
Basic Operation SOUND Adjustment SELECTION (SEL) Button Using the EQ (Equalizer) 1. Press the SELECTION (SEL.) button repeatedly to select the The equalizer lets you adjust the equalization to match the acoustic characteristics of the car’s interior as desired. mode you want to adjust from volume, bass, treble, balance There are 5 stored equalizer curves which you can easily recall at and fader.
RDS Operation RDS Display Options PROGRAM TYPE FUNCTION To select a certain program type out of the reception band, the In normal RDS operation the display will indicate the station following procedure can be used. name. Pressing DISP on the front panel enables you to cycle through the various data types in the following sequence: 1.
RDS Operation RDS MODE Adjustment TA SEEK mode When the newly tuned station does not receive TP information for 1. Pressing the SEL. button for more than 2 seconds activats the 5 sec, the receiver retunes to the next station select mode.
Radio Operation Listening to radio stations NOTES • The presetting is not performed if there is no station to be tuned in. 1. Press the PWR/MUTE button to turn the unit on. • When automatic presetting is performed, the previous preset stations are automatically erased.
Operation with Audio CD, MP3 Disc Playing an Audio CD and MP3 Disc Pause 1. Press PLAY/PAUSE (B B /X) during playback. 2. To return to playback, press PLAY/PAUSE (B B /X) again. The unit can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs.
Page 16
Operation with Audio CD, MP3 Disc MP3 TRACK -10/+10 Repeat Durning playback, press the -10 button to go back to the previous 1. Press RPT during playback. 10th track, and press +10 button to go forward to the next 10th The “RPT”...
Troubleshooting Symptom Correction Cause Power doesn’t turn on. Confirm once more that all connections are correct. Leads and connectors are not properly The unit doesn’t connected. Rectify the problem that caused the fuse to blow, and operate. then replace it. Be very sure to install the correct fuse The fuse is blown.
Page 18
Specifications MP3 Disc compatibility with this unit is limited as General Output Power ......50W x 4CH(Max.) follows: Power Source .