Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the CAUTION: cover or back of this product. There are no user-serviceable This unit employs a Laser System. parts inside. Refer servicing to qualified service personnel. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference should the unit require mainte- Warning: To reduce the risk of fire or electric shock, do not...
Before Use To ensure proper use of this product, please read this owner’s Notes on Discs manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the disc by the Symbol Used in this Manual edges so that fingerprints do not get on the surface.
Before Use Use and care of the remote control (OPTIONAL) Using the remote control (OPTIONAL) Point the remote control in the direction of the front panel to Installing the battery operate. Pull the tray outward on the back of the remote control with a pencil or ball point pen and insert the battery with the plus (+) NOTES minus (-) poles pointing in the proper direction.
Before Use Protecting your unit from theft Attaching the front panel The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. 1. Press RELEASE ( ) to open the front panel. RELEASE ( Align the left side of the panel with the stopper, and then push the right side or the panel into the unit until it clicks.
Remote Control (OPTIONAL) • SKIP/SEARCH ( • POWER/MUTE ( - Backward or forward - Switches the unit ON search playback. and OFF. - Go to next track. - Press to mute the Returns to beginning of sound from the current track or go to speaker.
Installation Basic Installation Bend the claws according to Before installing, make sure that the ignition-switch is set to OFF and the thickness of the remove the terminal of the car battery to avoid short-circuiting. dashboard 1. Remove the existing receiver unit. 2.
Connections Connecting to Car Before connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. not supplied OPTIONAL 1 GND (BLACK) 2 PHONE (ORANGE) 3 DIMMER (PINK) DIMMER SWITCH CD CHANGER (Optional) 4 TO IGNITION (RED) IGNITION...
Connections Connecting to Car Connecting to Auxiliary Equipment (OPTIONAL) - Connect the AUDIO OUTPUT connector of this unit to the From antenna AUDIO INPUT connector of Auxiliary Equipment. To the wiring of vehicle Colors of leads 1 BLACK : This lead is for connection to the Ground. 2 ORANGE : This lead is for connection to the phone line.
Basic Operation Turning the unit on Adjusting the volume Press PWR/MUTE or any other button on the front panel or Use VOLUME to adjust the sound level. Press VOLUME (VOL.+/-) button on the front panel to increase or POWER/MUTE ( ) on the remote control to turn the unit on.
Basic Operation SOUND Adjustment Using the EQ (Equalizer) SELECTION (SEL) Button The equalizer lets you adjust the equalization to match car interior 1. Press the SELECTION (SEL.) repeatedly to select the mode acoustic characteristics as desired. you want to adjust from volume, bass, treble, balance and There are 3 stored equalizer curves which you can easily recall at fader.
RDS Operation RDS Display Options PROGRAM TYPE FUNCTION To select a certain program type out of the reception band, follow- In normal RDS operation the display will indicate the station name. ing procedure can be operated. Pressing DISP on the front panel enables you to cycle through the various data types in the sequence: 1.
RDS Operation RDS MODE Adjustment TA SEEK mode When the newly tuned station does not receive TP information for 1. Press the SEL button for more than 2 seconds it is activated 5 sec, the receiver retunes to next station selecting mode.
Radio Operation Listening the radio stations NOTES • The presetting is not performed if there is no station to be tuned in. 1. Press POWER/MUTE ( ) [PWR/MUTE on the front panel] • When the automatic presetting is performed, the previous button to turn the unit on.
Operation with Audio CD, MP3 Disc and CD changer Playing an Audio CD and MP3 Disc Pause 1. Press PLAY/PAUSE (B B /X) during playback. 2. To return to playback, press PLAY/PAUSE (B B /X) again. The unit can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs.
Operation with Audio CD, MP3 Disc and CD changer MP3 TRACK -10/+10 Repeat Durning playback, press the -10 (D-) 1. a. Press RPT during playback. button to go back to the previous 10th track, and press +10 (D+) The “RPT” appears in the display window. button to go forward to the next 10th track.
Troubleshooting Symptom Cause Correction Power doesn’t turn on. Leads and connector are incorrectly connected. Confirm once more that all connections are correct. The unit doesn’t The fuse is blown. Rectify the reason for the fuse blowing, then replace operate. the fuse. Be very sure to install the correct fuse with the same rate.
Specifications MP3 Disc compatibility with this unit is limited as General Output Power ......50W x 4CH(Max.) follows: Power Source .