Table of Contents
Advertisement
SOUND Adjustment
Using the EQ (Equalizer)
The equalizer lets you adjust the equalization to match car interior
acoustic characteristics as desired.
There are 3 stored equalizer curves which you can easily recall at
any time.
Here is a list of the equalizer curves:
• EQ POP : Reproduces the acoustics of pop music.
• EQ CLASSIC : Reproduces the acoustics of orchestral music.
• EQ ROCK : Reproduces the acoustics of rock music.
1. Press EQ/XDSS on the front panel to select the equalizer.
2. Press EQ/XDSS repeatedly to select among the following
equalizer.
POP → CLASSIC → ROCK → FLAT (NO display) → POP....
MUTE
1. Press PWR/MUTE [POWER/MUTE (
2. To cancel it press PWR/MUTE [POWER/MUTE (
SELECTION (SEL) Button
1. Press the SELECTION (SEL.) repeatedly to select the mode
you want to adjust from volume, bass, treble, balance and
fader. The mode indicator lights up in the following order.
2. Press CONTROL UP (VOL.+) or DOWN (VOL.-) ( or press
VOLUME (
quality.
)] to cut the sound.
)] again.
NOTE
The unit cannot adjust the bass and treble in the EQ on mode.
XDSS (Extreme Dynamic Sound System)
Press and hold EQ/XDSS button to reinforce treble, bass and sur-
round effect.
Basic Operation
VOL
BAS
TRB
BAL
/
) on the remote control) to adjust the sound
Turn right
Turn left
Increase the volume
Decrease the volume
VOL
level.
level.
Increase the bass
Decrease the bass
BAS
level.
level.
Increase the Treble
Decrease the Treble
TRB
level.
level.
Decrease the level of
Decrease the level of
BAL
the left speaker(s).
the right speaker(s).
Decrease the level of
Decrease the level of
FAD
the front speaker(s).
the rear speaker(s).
FAD
13
Advertisement
Table of Contents
