Unpack And Assembly; Unpacking The Printer; Accessories - CraftBot Flow User Manual

3. UNPACK AND ASSEMBLY

3.1. Unpacking the printer

Place the CraftBot box on the ground on a level surface. Make sure that there is a lot of open space around you.
1. Open the box with care, not to damage the contents if using a blade. Be careful and watch out for the printer as
well.
2. Remove the protective foam insert. You will find the Quick Start Guide located within the top protective foam
insert.
3. There is a Box inserted, which contains the accessories (including a flash drive with a copy of the CraftBot user
manual). Remove the Box with care as it supports the extruder during shipping.
4. Now you will find the CraftBot 3D printer itself completely enclosed in a protective plastic bag. Open the plastic
covering.
5. Firmly grasp the frame of the CraftBot. Consider its weight. Request physical help if needed.
6. Make sure not to touch the extruder or the electronic panel inside the appliance!
7. Place the CraftBot 3D printer on a stable and level surface with sufficient space surrounding around it.

3.2. Accessories

Below you can see contents of the box. First of all,
check the list to make sure nothing is missing!
1. AC Power cable according to your region (1x)
2. Filament guide tube holder (1x)
3. Filament guide tube (1x)
4. Filament spool holder (1x)
5. Filament spool (1x)
6. Hex wrenches (5x)
7. Flash drive (1x)
8. USB A-B cable (1x)
9. Nozzle kit (1x)
10. Cleaning kit (1x)
1 2
6 7
3 4
8 9
USER MANUAL V1.0
5
10
WWW. C R A FT B OT.C OM