File Management - CraftBot Flow User Manual

Temperature
Head and build plate temperature can be adjusted sep-
arately.
Adjust the temperature of the head and the build plate
touching the slider and the + and - buttons.
You can lock the previously set values if needed.
Speed
Print speed and extrusion volume can be modified in
percentage ratio to the original.
Use the reset button to change back the values of the
gcode.
Fan speeds also can be altered, if necessary.
Light
Lights within the appliance and display back-lighting can
be changed.
Extrude
For filament change use the Extrude / Reverse functions,
or the preprogrammed Load / Unload options.
Encoder
You can enable / disable the FMS functionality and email
notification.
Camera
You can enable the time-lapse function, if the printing al-
ready started. Here you can choose whether you want to
take a picture every 1, 5 or 10 seconds. This parameter
does not disables the remote camera access.

5.8. File management

Flow generation machines has a 4GB internal storage for printable items. In the Print menu, you can copy, move or
delete one or more items. Copy and move possible between internal storage and the flash drive, in both directions.
To access the file actions, press the Action
• To perform a file action, select the file / directory you want to perform the operation on. To enter a directory
short press it. You can select directories, by long pressing them.
• Select the desired action from the Actions menu.
• Go to the destination directory for file transfer, and perform the paste operation. It will copy or move the files /
directories to the selected directory.
Please note, the deleted files are not stored in recycle bin, and cannot be restored.
button.
USER MANUAL V1.0
WWW. C R A FT B OT.C OM