Connecting Transformer & Solenoid Valves; Connecting The Transformer - Hunter Hydrawise HC Quick Start Manual

CONNECTING TRANSFORMER & SOLENOID VALVES
Your controller has either 6 or 12 zones depending on the model you have purchased.
There are three COMMON wiring points for convenience – any or all of them can be used.
Refer to the diagram below when connecting your solenoid valves to the controller.
① Water main
② Master valve (optional)
③ Solenoid valves
④ Water to zones
⑤ Common wires
⑥ 24V AC plug pack

Connecting the Transformer

Step 1
Use the transformer supplied and connect
the wires to the red AC terminal blocks
on the unit marked as 24V. Polarity of the
wiring is not important.
4
⑥
①
Step 2
Turn the power on. The power indicator
will light up (see
② ③
④ previous page).
⑤
④