Solenoid Valve Wiring - Hunter Hydrawise HC Quick Start Manual

Solenoid Valve Wiring

Step 1
Take one wire from each
solenoid, twist together
and connect to the common
(usually white) wire of your
multicore irrigation cable.
Note: All wire connections
should be done using
waterproof connectors.
Step 4
Connect each of the
other solenoid wires to
one of the ZONE inputs.
Step 2
Connect each of the
other individual wires to
a different colored wire.
Record zones against wire
color for later reference.
Step 5
If a master valve (sometimes
labeled as MV on other
controllers) is installed, it can
be connected to any spare
zone as any of the zones can
be assigned as a master valve
output. Configuration of the
master valve in the Hydrawise
app is required.
Step 3
Connect the common
wire from the multicore
cable (usually white) to
any of the three terminals
on the controller marked
COMMON.
Step 6
Click the blue wiring
cover into place to
seal the controller and
protect the wiring.
5