Advertisement
This accessory kit is designed for use on Triumph
Thruxton motorcycles only and should not be fitted to
any
other
Triumph
manufacturer's motorcycle. Fitting this accessory kit to
any
other
Triumph
manufacturer's motorcycle, may interfere with the rider
and could affect the stability or other aspects of the
motorcycle's operation which may result in loss of
motorcycle control and an accident.
Always have Triumph approved parts, accessories and
conversions fitted by a trained technician of an
authorised Triumph dealer. The fitment of parts,
accessories and conversions by a technician who is not
of an authorised Triumph dealer may affect the
handling, stability or other aspects of the motorcycle's
operation which may result in loss of motorcycle control
and an accident.
When fitting this accessory kit, ensure that the
motorcycle is stabilised and adequately supported to
prevent risk of injury from the motorcycle falling.
Failure to tighten any of the fasteners to the correct
torque specification may result in loss of motorcycle
control and an accident. Always use a calibrated torque
wrench.
Note:
•
Arrow exhaust system kits are not compatible
with this centre stand kit.
Warning
model
or
to
any
model
or
to
any
Warning
Warning
Warning
1.
Fit the spring retainer to the hole on the left hand
side of the frame, above the centre stand mounting
brackets as shown. Fit the M8 lock nut and tighten to
27 Nm.
other
other
cdju
1. Spring retainer
2.
Lubricate the flanged sleeves with the grease
supplied and fit them to the stand ensuring each
sleeve is fitted from the right hand side as shown
below.
T908.CS.03
1. Flanged sleeves
2. Centre stand
3.
Align the centre stand to the mounting brackets on
the frame. Position the stand on the right hand side
of the brackets.
2 of 5
1
2
1
Advertisement
