Advertisement
Quick Links
English
Fitting Instructions:
Thruxton (not California & Taiwan models)
Centre Stand Kit - A9758100
Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven
engineering, exhaustive testing, and continuous striving for superior reliability, safety and performance.
Completely read all of these instructions before commencing the installation of the accessory kit in order to become
thoroughly familiar with the kit's features and the installation process.
These instructions should be considered a permanent part of your accessory kit, and should remain with it even if your
accessory equipped motorcycle is subsequently sold.
Parts Supplied:
1.
Centre stand
2.
Lock nut, M10
3.
Plastic plug
4.
Rubber stop
5.
Rubber strip, self adhesive
6.
Stop extension
7.
Spring
8.
C-bracket
Publication part number A9900015 issue 6, DC 72182
© Triumph Designs Ltd. 2015
12
11
10
9
8
7
1 off
9.
3 off
10. Bolt, M10 x 40 mm
1 off
11.
1 off
12. Lock nut, M8
1 off
13. Shim, 2.5 mm
1 off
14. Cleaning swab (not shown)
1 off
15. Sachet, grease (not shown)
1 off
1 of 5
13
1
2
3
6
Flanged sleeve
Spring retainer
4
5
2 off
2 off
1 off
1 off
1 off
1 off
1 off
Advertisement
Related Manuals for Triumph A9758100
Summary of Contents for Triumph A9758100
- Page 1 Thruxton (not California & Taiwan models) Centre Stand Kit - A9758100 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering, exhaustive testing, and continuous striving for superior reliability, safety and performance.
- Page 2 Fit the M8 lock nut and tighten to This accessory kit is designed for use on Triumph 27 Nm. Thruxton motorcycles only and should not be fitted to...
- Page 3 Insert the M10 x 40 mm bolts from the inside so that Warning the threaded ends of the bolts face outwards. Fit a M10 lock nut to the bolt on the left hand side of the Installing the shim by force will prevent the centre stand motorcycle and tighten to 45 Nm.
- Page 4 Fit the spring into the smaller hole in the C-bracket. 12. Use the cleaning swab provided to clean the left hand side of the centre stand. 13. Peel the backing from the rubber strip and affix to the centre stand such that it prevents contact between the centre stand and the side stand.
- Page 5 If, after fitment of this accessory kit, you have any doubt new handling characteristics. Operate the motorcycle in about the performance of any aspect of the motorcycle, a safe area free from traffic to gain familiarity with any contact an authorised Triumph dealer and do not ride handling characteristics. Operation...