Installation Instructions - Wells WFPE-30F Installation, Operation And Maintenance Manual

Bloomfield industries installation, operation and maintenance manual for electric pressure fryer wfpe-30f

Hide thumbs Also See for WFPE-30F:

Operation manual (25 pages)

Parts list (10 pages)

Specifications (2 pages)

Table Of Contents

Table of Contents

UNPACKING AND INSPECTION

1. Carefully remove the FRYER from the carton. Remove all protective plastic film, packaging

materials and accessories from the FRYER and the FILTER RESERVOIR before connecting

electrical power to the FRYER or otherwise performing any installation procedures.

NOTE: DO NOT discard the CARTON and other PACKAGING MATERIAL until you have

inspected the fryer for HIDDEN DAMAGE and tested it for PROPER OPERATION.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

2. Read all instructions in this manual carefully before starting installation of this fryer. READ

AND UNDERSTAND ALL LABELS AND DIAGRAMS ATTACHED TO THE FRYER.

3. Carefully account for all components and accessories before discarding packing materials.

Store the accessories in a convenient place for later use:

COMPONENTS

ACCESSORIES

SERVICE TECHNICIAN INSTALLATION NOTES

1. Installation and start up should be performed by a Wells Mfg. Authorized Service Agency.

Installer must complete the WARRANTY REGISTRATION / FRYER CHECKOUT form, and

record fryer installation particulars on the CUSTOMER SERVICE DATA form in this manual.

2. Verify that this FRYER installation is in compliance with the specifications listed in this manual

and with local code requirements. THIS IS THE RESPONSIBILITY OF THE INSTALLER.

3. Certain codes require fryers to be restrained with a TETHER or other RESTRAINT DEVICE.

It is the RESPONSIBILITY OF THE INSTALLER to check with the AUTHORITY HAVING

JURISDICTION, in order to ascertain the applicability of this requirement to THIS SPECIFIC

FRYER INSTALLATION.