Safety Procedures - Wells WFPE-30F Installation, Operation And Maintenance Manual

Bloomfield industries installation, operation and maintenance manual for electric pressure fryer wfpe-30f
Hide thumbs Also See for WFPE-30F:
Table of Contents

Advertisement

Knowledge of proper procedures is essential to the safe operation of electrically energized
equipment. In accordance with generally accepted product safety labeling guidelines for
potential hazards, the following signal words and symbols are used throughout this manual.
DANGER
WARNING -
personal injury and possibly death, or major property damage, in the event the state-
ment is ignored.
CAUTION -
cause minor personal injury, or property damage in the event the statement is ignored.
CAUTION -
cause personal injury, or property damage in the event the statement is ignored.
NOTE -
Note is used to notify personnel of installation, operation or maintenance information
which is important, but not hazard related.
FRYER PRECAUTIONS AND GENERAL INFORMATION
1.
This fryer is intended for use to deep fry food products for human consumption. No other use
is recommended or authorized.
2.
This fryer is intended for use in commercial establishments, where all operators are familiar with
the appliance use, limitations and associated hazards. Operating instructions and warnings must
be read and understood by all operators and users.
3.
Your WELLS fryer is equipped with an oil filtration system, which is designed to filter hot liquid
shortening ONLY. Water, cleaning agents or other liquids will damage the FILTER PUMP.
4.
This piece of equipment is made in the USA and has American sizes on hardware.
5.
Any trouble shooting guides, component views or parts lists included in this manual are for general
reference only, and are intended for use by qualified technical personnel.
6.
This manual should be considered a permanant part of this appliance. This manual and all
supplied instructions, diagrams, schematics, parts break downs, notices and labels must remain
with the appliance if it is sold or moved to another location.

SAFETY PROCEDURES

DANGER -
Danger is used to indicate the presence of a hazard which will
cause severe personal injury, death, or substantial property damage in the
event the statement is ignored.
Warning is used to indicate the presence of a hazard which can cause
Caution is used to indicate the presence of a hazard which will or can
Used to indicate the presence of an electrical hazard which will or can
4

Advertisement

Table of Contents
loading

Table of Contents