Replacing A Turn Signal Light Bulb; License Plate Light - Yamaha XSR 700 Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
Periodic maintenance and adjustment
EAU24205
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.

License plate light

1
If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
[ECA11192]
6-36
EAU24331
6