Nibe S1155 Installer Manual page 68

ECS 40 (Max 80 m²)
Part no 067 287
FILLING VALVE KIT KB 25/32
Valve kit for filling brine in the collector hose. Includes
particle filter and insulation.
KB 25 (max. 12 kW)
Part no 089 368
FREE COOLING PCS 44
This accessory is used when S1155 is installed in an
installation with passive cooling.
Part no 067 296
HUMIDITY SENSOR HTS 40
This accessory is used to show and regulate humidity and
temperatures during both heating and cooling operation.
Part no. 067 538
PASSIVE COOLING PCM S40/S42
PCM S40/42 makes it possible to obtain passive cooling
from rock, groundwater or surface soil collectors.
Part no. 067 625 / 067 626
POOL HEATING POOL 40
POOL 40 is used to enable pool heating with S1155.
Part no 067 062
ROOM UNIT RMU S40
The room unit is an accessory that allows the control and
monitoring of S1155 to be carried out in a different part of
your home to where it is located.
Part no. 067 650
SOLAR PACKAGE NIBE PV
Solar panel package, 3 - 24 kW, (10 - 80 panels), which is
used to produce your own electricity.
68 Chapter 12 | Accessories
ECS 41 (approx.
80-250 m²)
Part no 067 288
KB 32 (max. 30 kW)
Part no 089 971
VENTILATION HEAT EXCHANGER ERS
This accessory is used to supply the accommodation with
energy that has been recovered from the ventilation air.
The unit ventilates the house and heats the supply air as
necessary.
ERS S10-400
Part no. 066 163
Electric air heater EAH
In cold weather, EAH heats the incoming outdoor air
slightly to prevent the condensation in ERS from freez-
ing. Used mainly in colder climates.
EAH 20-900 (300-900 W)
Part no. 067 604
WATER HEATER/ACCUMULATOR TANK
VPA
Water heater with double-jacketed vessel.
VPA 300/200 Cu UK
Copper Part no. 082 024
VPB
Water heater without immersion heater with charging coil.
VPB 500 UK
Copper Part no. 081 056
VPB S
Water heater without immersion heater with charging coil.
VPB S300 R UK
Stainless Part no. 081 147
steel
ERS 20-250
Part no. 066 068
EAH 20-1800
(300-1800 W)
Part no. 067 603
NIBE S1155