Nibe S1155 Installer Manual page 62

3. Disconnect the pipe connection under the shut-off
valve (QM31).
4. Remove the two screws.
5. Disconnect the connectors (XF2), (XF11) and (XF22).
6. Carefully pull out the cooling module.
TIP
The cooling module is installed in reverse order.
62 Chapter 10 | Service
XF22 XF2 XF11
NOTE
During reassembly, the enclosed O-rings
should replace the existing ones on the shut-
off valves (QM32), (QM33) and (QM34).
NIBE S1155