Fiber Port Leds - H3C S1200 Series Getting Started Manual

Table 10 PoE-MAX LED description(S1224-PWR)
Status
Steady yellow
Off
NOTE:
A port with a smaller port ID has a higher priority for getting power. When the PoE power reaches the
guard band and a new port requires power, the switch compares the port IDs and performs one of
the following actions:
• Does not supply power to the new port if the ID of the new port is greater than IDs of all existing
ports.
• Stops power supply to existing ports whose IDs are greater than the ID of the new port, and
supplies power to the new port.

Fiber port LEDs

Table 11 SFP port LED description
Status
Steady yellow
Flashing yellow
Steady green
Flashing green
Off
Table 12 SFP+ port LED description
Status
Steady yellow
Flashing yellow
Steady green
Flashing green
Off
Description
The PoE power reaches the guard band (104 W to 124 W).
The PoE power does not reach 104 W.
Description
A 100-Mbps link is present.
The port is receiving or sending data at 100 Mbps.
A 1000-Mbps link is present.
The port is receiving or sending data at 1000 Mbps.
No link is present.
Description
A 1000-Mbps link is present.
The port is receiving or sending data at 1000 Mbps.
A 10-Gbps link is present.
The port is receiving or sending data at 10 Gbps.
No link is present.
20