Cisco 8800 Series Manual page 9

Your Phone
Figure 2: Adjust the Handset Rest
Procedure
Step 1 Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Change the Viewing Angle of Your Phone
You can change the angle of the phone to eliminate glare on the screen. If your phone has a video camera,
you can change the angle to improve the camera view.
Procedure
Step 1
Hold the receiver in the cradle with one hand.
Step 2 Move the footstand with the other hand to change the angle.
Step 3
(Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion
module are stable.
Step 4
(Optional) Press Self-view to check the camera angle.
Change the Viewing Angle of Your Phone
Your Phone
9