Cisco 8800 Series Manual page 11

Your Phone
Step 2 Press Applications
Step 3
Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.
Step 4 Navigate to Wireless and press On.
Step 5
Navigate to Wi-Fi sign in access and press On.
Step 6 Press Apply to save the changes, or press Revert to cancel the changes.
Connect to a Preconfigured Wi-Fi Network
You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR
does not support Wi-Fi.
Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi
network or when your phone powers up.
You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.
Procedure
Step 1 Enter your Wi-Fi credentials when prompted.
Step 2 Select Sign-in.
Connect to a VPN
You connect to your VPN in one of two ways:
• By entering credentials (username and password, or just a password)
• With a certificate
If you have a certificate installed on your phone, you do not need to do anything. Your phone automatically
connects to the VPN.
Procedure
Step 1 When prompted, enter your VPN credentials.
Step 2
Select Sign-in.
Set up a Phone for Use with VPN
Before you begin
To complete this procedure, you must have a valid TFTP server address. If you do not have this information,
contact your administrator.
You cannot use the Wi-Fi client with the Cisco IP Phone 8865NR.
.
Connect to a Preconfigured Wi-Fi Network
Your Phone
11