Concluding Work - BMW 84 64 0 153 493 Installation Instructions Manual

8.

Concluding work

0
This upgrade system requires coding and must be coded using DISplus, MoDiC III or GT1 via the
"Retrofit" path.
- Connect battery
- Conduct a brief test with DISPlus/MoDiC III/GT1
- Synchronize the mobile phone and the universal charger/hands-free electronic control unit
- Activate the Bluetooth function of the mobile phone (see the mobile phone owner's manual)
- Press and hold the push-to-talk button for about 1 second whilst switching on terminal R
- Release the push-to-talk button. The radio display shows "BT PAIRING" and the MID or on-board
monitor displays "BLUETOOTH PAIRING".
The checklamps on the MID or on-board monitor flash during the connection phase.
- Activate the "Locate Bluetooth Devices" menu on the mobile phone (see the mobile phone owner's
manual). This process may take a few minutes.
- Work through additional menus in accordance with the instructions displayed on the mobile phone
- When prompted to do so, enter the 4 digit "BLUETOOTH PASSKEY" (see the sticker on the owner's
manual) using the mobile phone keypad
- The radio, MID or on-board monitor displays "SUCCEEDED" to confirm that synchronisation has been
carried out correctly
- Switch off the ignition – the connection is terminated
- Conduct a function test
- Assemble the car again following the instructions to dismantle it in reverse order
Retrofit kit No. 84 64 0 153 493
Installation Instructions No. 01 29 0 153 674 Issue date: 09.2002
EN/13