Case Front Controls - Lincoln Electric POWER FEED 25M NNS Operator's Manual

POWER FEED™ 25M NNS

CASE FRONT CONTROLS

(SEE FIGURE B.1)
1. Left DISPLAy window
Shows WIRE FEED SPEED or AMPERAGE.
2. Left KNOB
Adjusts values in left display.
3. Main display
Shows detailed welding and diagnostic information.
4. Left Button
Changes the Main display to show the Weld Mode or
UltimArc.
5. Procedure Button
Selects A or B procedure, or gun control.
6. 2-Step/4-Step Button
Toggles between 2-step and 4-step trigger operation.
7. Gun Shielding Gas Connections
8. ON/OFF switch
Controls power to the POWER FEED™ 25M NNS.
9. Gun Electrode Connection
5
9
FIGURE B.1
1
2
3
4
6
10
10. Gun Trigger Connection
11. Right Display window
Shows VOLTAGE or TRIM.
12. Right Knob
Adjusts values in the right display.
13. Thermal
Lights when the drive overheats.
14. Set-Up
Lights when feeder is set-up.
15. Right Button
Changes the Main display to show Start Options or
End Options.
16. Set Knob
Changes the value on the Main display.
17. Memories Buttons
For selection of common procedures.
18. Gun Conduit Connection
11
13
15
17
B 4
OPERATION
14
16
18