Tws Mode - Silvercrest XL SLXL 20 A1 Operating Instructions And Safety Instructions

TWS mode

If you purchase a second loudspeaker of the same type
(IAN 313951), it is possible to connect both loudspeakers and use them
as a stereo loudspeaker system. A second loudspeaker can be purchased
at www.kompernass.com.
The TWS ("True Wireless Stereo") function allows two speakers to be connected
to each other.
The left speaker is thus the main speaker which is always connected to a
Bluetooth
Bluetooth
Activate TWS mode
NOTE
Do not activate TWS mode if there is a Bluetooth
►
a speaker and a Bluetooth
♦ Switch on both speakers.
♦ Briefly press the
left speaker. You will hear a beep and the TWS LED
during pairing.
♦ Press the button
♦ If the pairing of the two speakers has been successful, you will hear a short
beep. TWS mode is activated.
♦ The TWS LED
♦ The TWS LED
Pair the left speaker with a Bluetooth
♦
Start playback on the Bluetooth
♦
NOTE
► If you do not pair the two speakers within 6 minutes, the speakers will turn
off automatically. In this case, you will have to switch the speakers back on
again before restarting the pairing process.
► Make sure you position the left and right speakers correctly for playback.
► The playback buttons work on both speakers.
│ GB │ IE │ NI
■ 12
®
device. This speaker transmits the sound coming from the
®
device to the right speaker.
button
on the second speaker briefly.
on the left speaker lights up green.
on the right speaker flashes green.
®
device.
on the first speaker that you want to use as the
®
device.
®
device.
®
connection between
flashes green rapidly
SLXL 20 A1