Handling And Operation; Pairing The Speaker With A Bluetooth ® Device - Silvercrest XL SLXL 20 A1 Operating Instructions And Safety Instructions

Handling and operation

Pairing the speaker with a Bluetooth
NOTE
If you want to pair the loudspeaker with a Bluetooth
►
jack socket
When using the device for the first time, proceed as follows:
Ensure that the speaker is switched off and the Bluetooth
♦
switched on.
Set the Bluetooth
♦
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
♦ Press and hold the
You will immediately hear a rising sequence of beeps and the operating/
charging LED
and the operating/charging LED
The Bluetooth
♦ Select the entry
Blue tooth
devices. You will hear a beep and the operating/charging LED
blue every 3 seconds once the connection has been successfully established.
Start playback on the Bluetooth
♦
♦ Press and hold the
and deactivate the Bluetooth
of beeps. The operating/charging LED
simultaneously and then goes out.
│ GB │ IE │ NI
■ 10
may not be occupied.
device so that it scans for other Bluetooth
®
®
button for about 3 seconds to turn the speaker on.
flashes blue and orange twice. Then you will hear a beep
®
function is now activated automatically.
from the list of found devices on your
®
device and, if required, enter the code
button for about 3 seconds to turn the speaker off
®
®
device
device.
flashes alternatively orange und blue.
®
device.
function. You will hear a descending series
flashes blue and orange twice
®
device, the 3.5 mm
®
device is
®
devices.
to connect the two
flashes
SLXL 20 A1