Connect Speaker To Another Bluetooth ® Device; Automatic Connection When Switching On; Tws Mode; Activate Tws Mode - Silvercrest SLXL 30 C1 Operating Instructions And Safety Instructions

SilverCrest SLXL 30 C1
•
Now, start playback on your Bluetooth
during which the power/charging LED (15) slowly flashes blue.
•
Hold down the on/off button
connection. A series of beeps will sound and the power/charging LED (15) will switch off.
9.2.1 Connect speaker to another Bluetooth
To connect the currently connected speaker to another Bluetooth
must first be disconnected by pressing the
feature on the currently connected Bluetooth
A beep will sound and the power/charging LED (15) will flash blue rapidly. Pairing mode is now
active and the speaker can be connected to another Bluetooth

9.2.2 Automatic connection when switching on

The speaker automatically connects to the last connected Bluetooth
If this is not the case, you will need to connect manually. Please consult the operating instructions of
®
your Bluetooth device.

9.3 TWS mode

By purchasing a second speaker of the same type (SLXL 30 C1), it is possible to pair both speakers
and use them as a stereo speaker system. A second speaker can be purchased at
www.lidl.de/de/onlineshop [in German].
TWS: 'True Wireless Stereo'.
This function allows two speakers to be coupled.
The left speaker acts as the main speaker, which is connected to a Bluetooth
transmits the audio signals it receives to the second (right) speaker.

9.3.1 Activate TWS mode

•
Switch on the speaker that should act as the main speaker. Establish the Bluetooth
your smartphone with this speaker.
•
Now, switch on the second speaker.
•
Press the (6) button on the main speaker. A beep will sound and the TWS LED (14) will flash
green rapidly for approximately 30 seconds, which indicates the speaker is in TWS pairing
mode.
•
Now, briefly press the
speaker is still flashing green. A beep will sound and the TWS LED (14) will flash green rapidly
for approximately 30 seconds, which indicates the speaker is in TWS pairing mode.
Two speakers can only be paired with TWS pairing if TWS pairing mode is activated on
both speakers.
•
A beep indicates the coupling was successful. TWS mode is now active. Playback will now occur
through both speakers.
12 - English
®
device. Playback occurs via the connected speaker,
(1) for approximately 3 seconds to end the Bluetooth
(5) button. Alternatively, you can disable the Bluetooth
®
device.
(6) button on the second speaker while the TWS LED on the main
®
device
®
device, the existing connection
®
device.
®
device when switched on.
®
®
®
device . It
®
connection to