Control Pads On The Dehumidifier; Control Pads - Nobu 20DEN1 User Manual

NOTE: The control panel of the unit you purchased maybe slightly different according to the
models.
High fan
Ion operation on
indicator light
indicator light
7 6

Control pads

When you push the button to change opera-
tion modes, the unit will make a beep sound to
indicate that it is changing modes.
➊ Power Pad
Press to turn the dehumidifier on and off.
NOTE: When the compressor startups or stops
running, the unit may make a loud voice, it is
normal.
➋ Mode Pad
Press to select the desired operation mode from
Dehumidifying, Dryer, Continuous dehumidifying
and Smart dehumidifying.
NOTE: Dryer and Smart dehumidifying modes are
optional.
Down/Up Pads
➌ ➍
• Humidity Set Control Pads
The humidity level can be set within a range of
35%RH(Relative Humidity) to 85%RH(Relative
Humidity) in 5% increments.
For drier air, press the
percent value(%).
For damper air, press the
percent value(%).
• TIMER Set Control Pads
Use the Up/Down pads to set the Auto start and
Auto stop time from 0.0 to 24.
Timer on/off Bucket full
indicator light indicator light
5 4
pad and set to a lower
pad and set a higher

CONTROL PADS ON THE DEHUMIDIFIER

Dryer operation
on indicator light
3
➎ Timer Pad
Press to initiate the Auto start and Auto stop fea-
ture, in conjuction with the
➏ Turbo Pad
Control the fan speed. Press to select either High
or Normal fan speed. Set the fan control to High
for maximum moisture removal. When the humidi-
ty has been reduced and quiet operation is pre-
ferred, set the fan control to Normal.
➐ Ion Pad
Press to activate the ionizer. Anions ar automati-
cally generated by ionization. The anions deactive
the airborne chemical vapors and dust particles.
Press it again to stop the function.
5
Continuous Smart dehumidifying
operation operation on indicator
indicator light light
Unit operation
on indicator light
2 1
and key pads.