Control Pads On The Dehumidifier; Control Pads - Nobu AK-20L User Manual

NOTE: The control panel of the unit you purchased maybe slightly different according to the
models.

Control pads

When you push the button to change opera-
tion modes, the unit will make a beep sound to
indicate that it is changing modes.
➊ Power Pad
Press to turn the dehumidifier on and off.
NOTE: When the compressor startups or stops
running, the unit may make a loud voice, it is
normal.
➋ Mode Pad
Press to select the desired operation mode from
Dehumidifying, Dryer, Continuous dehumidifying
and Smart dehumidifying.
NOTE: Dryer and Smart dehumidifying modes are
optional.
Down/Up Pads
➌ ➍
• Humidity Set Control Pads
The humidity level can be set within a range of
35%RH(Relative Humidity) to 85%RH(Relative
Humidity) in 5% increments.
For drier air, press the
percent value(%).
For damper air, press the
percent value(%).
• TIMER Set Control Pads
Use the Up/Down pads to set the Auto start and
Auto stop time from 0.0 to 24.
FAN
6 5 4
pad and set to a lower
pad and set a higher

CONTROL PADS ON THE DEHUMIDIFIER

3 2
➎ Timer Pad
Press to initiate the Auto start and Auto stop fea-
ture, in conjuction with the
➏ Fan Pad
Control the fan speed. Press to select either High
or Normal fan speed. Set the fan control to High
for maximum moisture removal. When the humidi-
ty has been reduced and quiet operation is pre-
ferred, set the fan control to Normal.
13
1
and key pads.