Identification Of Parts - Nobu 20DEN1 User Manual

Dryer mode
The unit can make the MAX dehumidification function when it is
under the Dryer mode. The fan speed is fixed at high fan speed.
The humidity level is automatically controlled according to the ac-
tual room humidity .The unit will quit dryer mode after a maximum
10 hours' operation.
NOTE:
•
The Dryer mode must be operated in a close room, do not
open the door and window.
•
To make the best effective dehumidification ,please first dehy-
drate the wet clothes.
•
Make sure to direct airflow at the wet clothes (See Fig.A).
•
For thick and heavy wet clothes may not get the best effective
dehumidification.
CAUTION
•
Do not cover the air outlet of the unit with clothes. It may cause
excessive heat, fire or failure of unit.
•
Do not place the wet clothes on the top of the unit and do not
make the water drop into the unit. It may cause electric shock,
creepage or failure of unit.

Identification of parts

Front
➊ Control panel
➋ Handle (both sides)
➌ Air outlet grille
➍ Water bucket
➎ Water level window
Rear
➊ Drain hose outlet
➋ Caster
➌ Power Cord and plug
➍ Air intake grille
➎ Air filter (behind the grill)
➏ Power cord Buckle (Used only when storing the unit.)
NOTE: All the pictures in the manual are for explanation
purposes only. The actual shape of the unit you purchased
may be slightly different, but the operations and functions
are the same.
IDENTIFICATION OF PARTS
30~50cm
Airflow
Fig.A
3
4
5
1
2
3
7
Wet clothes
30~50cm
Allow 30~50cm of distance
on the top and right side of
the unit to the wet clothes.
1
2
Fig. 2
Fig. 3