Buttons & Interfaces - Tenda AC9 User Manual

Off
Solid
Blinking
WPS
Off
Solid
USB Blinking
Off
3 Buttons & Interfaces
Button/Interface Description
Power DC-IN This interface is used to connect to the included power adapter of the router for power supply.
Press and hold it for a second and then release it to enable the WPS feature; please enable
WPS
the wireless device's WPS feature to establish WPS connection within 2 minutes.
WiFi Press and then release it to enable/disable WiFi.
Use the end of a paper clip or a similar object to press and hold this button for about 8 seconds
Reset
until all the LEDs light up and then release it to restore factory settings.
This port is used to connect to the Internet via an Ethernet cable.
Internet
3
5GHz WiFi is disabled.
WPS is enabled.
The Router is performing WPS negotiation to a client device.
WPS is disabled.
A USB device is well-connected and ready.
Data is being transmitted.
No USB device is detected, or USB device is ejected safely.
Get to Know Your Router