Zte MF286 Getting Started page 90

NOTE:
If you change the operation mode, the device will be
restarted automatically.
4. Set the detail parameters for the operation mode.
• For Cable Broadband Mode
You need to connect the WAN to the LAN1 port
(LAN1/WAN) via Ethernet cable and select the
WAN Connection Mode. The other LAN ports
(LAN2~LAN4) are used to connect PC or laptop.
There are three WAN Connection Modes:
PPPoE, Static IP and Dynamic IP. Please
contact with your service provider to confirm
which mode is fit for you.
Select Settings > Connection Mode to change
the WAN connection mode and set the detail
parameters.
PPPoE mode
u
Select PPPoE, input the User Name and
Password and then set the WAN Connection
Mode.
NOTE:
Your service provider gives you the User Name and
Password.
90