Safety Requirements - Vents VUT 180 P5 User Manual

SAFETY REQUIREMENTS

• Please read the user's manual carefully prior to installing and operating the unit.
• All user's manual requirements as well as the provisions of all the applicable local and national
construction, electrical, and technical norms and standards must be observed when installing
and operating the unit.
• The warnings contained in the user's manual must be considered most seriously since they
contain vital personal safety information.
• Failure to follow the rules and safety precautions noted in this user's manual may result in an
injury or unit damage.
• After a careful reading of the manual, keep it for the entire service life of the unit.
• While transferring the unit control, the user's manual must be turned over to the receiving
operator.
• Disconnect the unit from
power mains prior to any
installation operations.
• Do not lay the power cable of
the unit in close proximity to
heating equipment.
• Do not change the power
cable length at your own
discretion. Do not bend the
power cable. Avoid damaging
the power cable. Do not put
any foreign objects on the
power cable.
• Do not use damaged
equipment or cables when
connecting the unit to power
mains.
• Do not touch the unit controls
with wet hands. Do not
carry out the installation and
maintenance operations with
wet hands.
www.ventilation-system.com
UNIT INSTALLATION AND OPERATION SAFETY PRECAUTIONS
• The unit must be grounded!
• While installing the unit, follow
the safety regulations specific
to the use of electric tools.
• Unpack the unit with care.
• Do not operate the unit
outside the temperature
range stated in the user's
manual. Do not operate the
unit in aggressive or explosive
environments.
• Do not wash the unit with
water. Protect the electric parts
of the unit against ingress of
water.
3