Extech Instruments 42582 User Manual page 5

Manual Datalogging Mode
This instrument has two datalogging modes,
查询"42582"供应商
maximum) and Automatic Datalogging (12,000 records maximum). Data saved in the
LOG
Manual Datalogging mode can be recalled in the display, printed or transferred to a pc.
Manual Datalogging basics
To take a reading and store it in memory:
1. Press the F2 softkey from the WELCOME screen.
MEM
2. Use the arrow buttons to select a memory location (1 through 99).
3. Press and hold the ON key to take a measurement as previously described. Release
the ON key to end the test.
4. Press the F4 or the F1
SAVE
Manual Datalogging Display Screen 1
F1 EXIT: Press to return to the WELCOME screen
Press to enter the measurement mode.
F2 MEAS
F3 EDIT: Press to begin customizing the header in the current memory location. Header
customization is covered in a dedicated section later in this manual.
Go to Manual Datalogger Screen 2.
F4 NEXT
Manual Datalogging Display Screen 2
F1 EXIT: Press to return to the WELCOME screen
F2 CLR: Press for one second to erase the current memory location. Press and hold for
longer than one second to erase all records currently held in memory.
F3 PRN: Press to print one or more readings. The instrument will prompt the user for a
start and end memory point.
F3 BACK: Go to Manual Datalogger screen 1.
01: 07-06 05:42:50
o
Ext: 82.0 F
o
Ir: 82.0 F
02: 07-06 05:42:55
o
Ext: 82.0 F
o
Ir: 82.0 F
EXIT MEAS EDIT
MANUAL DATALOG SCREEN 1
Manual Datalogging (99 records
MEM
key.
ABORT
01: 07-06
Ext:
Ir: 82.0 F
02: 07-06
Ext:
Ir: 82.0 F
NEXT
EXIT
MANUAL DATALOG SCREEN 2
5
05:42:50
o
82.0 F
o
05:42:55
o
82.0 F
o
CLR PRN BACK
Model 42582 Version 6.0 Sept 2007