Table of Contents
Advertisement
GP Start-up and Maintenance
• The liquid crystal panel contains a powerful irritant and if
for any reason the panel is damaged and this liquid con-
tacts any part of your body, be sure to wash that area
with running water for 15 minutes. If any of this liquid
enters your eye, flush your eye for 15 minutes with run-
ning water and contact a physician.
GP Disposal
• When this unit is disposed of, it should be done so ac-
cording to your country's regulations for similar types of
industrial waste.
General Safety Precautions
<Usage Environment>
• Never strike the touch panel with a hard, heavy or pointed object, or
press on the touch panel too strongly, since it may damage the unit.
• If the GP is used in an environment with temperatures and humidity in
excess of the allowed range, the GP may malfunction and/or its opera-
tion life may be shortened.
• Avoid restricting the GP's naturally occurring ventilation, or storing or
using the GP in an environment that is too hot.
• Do not use this unit in areas where large, sudden temperature changes
can occur. These changes can cause condensation to form inside the
unit., possibly causing the unit to malfunction.
• Do not allow water, liquids, metal or charged particles to enter inside
the GP's case, since they can cause either a GP malfunction or an
electrical shock.
• Avoid using or storing the GP in direct sunlight, or in excessively dusty
or dirty environments.
• Because the GP is a precision instrument, do not store or use the unit
where large shocks or excessive vibration can occur.
• Do not store or use the GP where chemicals (such as organic solvents,
etc.) and acids can evaporate, or where chemicals and acids are present
in the air.
• Do not use paint thinner or organic solvents to clean the GP.
GP-37W3 Series User Manual
CAUTIONS
Preface
7
Advertisement
Table of Contents
