Table of Contents
Advertisement
Chapter 6 - Maintenance
4. Confirm that the water-resistant gasket is correctly installed.
• The gasket must be inserted correctly into the groove for the GP's
moisture resistance to be equivalent to IP65f.
• Be sure the gasket's seam is not inserted into any of the unit's cor-
ners, only in the straight sections of the groove. Inserting it into a
corner may lead to its eventually tearing.
• The upper surface of the gasket should protrude approximately 2mm
out from the groove. Be sure to check that the gasket is correctly
inserted before installing the GP into a panel.
6-2
Seam
GP-37W3 Series User Manual
Advertisement
Table of Contents
