Accessories - Pro-face GP-37W3 Series User Manual

1.2

Accessories

All optional equipment listed below is produced by Digital.Electronics Corporation.
Available Software
Product Name
Pro-Designer
Ver. 4.0 or later
Tool Connector
Product Name
Screen Data Transfer
Cable
Memory Loader II
Serial Interface
Product Name
RS-232C cable
RS-422 cable
RS-422 cable
Connector terminal
block converter
2 Port Adapter II
2 Port Adapter II Cable
Mitsubishi A Series
Programming Port I/F
cable
Mitsubishi FX Series
Programming Port I/F
cable
*1 For detailed information about range of connectable PLCs.
GP-37W3 Series User Manual
Model No.
PS-DWE01-V40
<CD-ROM>
Model No.
GPW-CB02
GP070-LD01-O
Model No.
*1
GP410-IS00-O
*1
GP230-IS11-O
GP070-CN10-O
GP070-MD11
GP070-MDCB11
GP430-IP10-O
GP430-IP11-O
Pro-Designer On-line Help
Chapter 1 - Introduction
Description
Software to be used to create screen
data using a personal computer.
Description
Connects the GP to a personal computer.
Transfers screen data and user
program(s).
Copies data (system and screen data)
from one GP to another GP. Rev. H or
later
Description
Interface cable between the host (PLC)
and GP.
Adapter to convert serial data to RS-422
format.
Interface unit that allows use of both GP
and Mitsubishi A, Q, C and FX series
equipment in the same location.
Connects the GP to 2 Port Adapter II.
Connects directly to Mitsubishi's PLC I/F
Programming Console. Simultaneous
use of program console, however, is not
possible.
1-3