Meas:mark:tonp; Meas:mark:trace; Trace Commands; Meas:tra:val1:Val2 - Test Equipment Depot GSP-730 User Manual

meas:mark:tonp

Description
Syntax
Parameter
Example

meas:mark:trace

Description
Syntax
Parameter
Example

Trace Commands

meas:tra:val1:val2

Description
Syntax
Moves the selected normal or delta marker to the
next peak.
meas:mark:tonp <NR1>
<NR1> Marker number 1~ 5.
meas:mark:tono 1
Moves marker 1 to the next peak.
Sets the selected marker to the selected trace.
meas:mark:topeak <NR1> <trace>
<NR1> Marker number 1~ 5.
<trace> 0
1
2
3
meas:mark:trace 1 2
Sets marker 1 to trace B.
meas:tra:val1:val2 .................................................................... 95
meas:tra:avg:on ........................................................................ 96
meas:tra:avg:off ........................................................................ 96
meas:tra:read ............................................................................ 97
Sets the mode for the selected trace.
meas:tra <trace><mode>
REMOTE CONTROL
Set
Set
Auto (auto assign a trace)
Trace A
Trace B
Trace C
Set
95