Ieee488.2 Standard Commands; Idn; Sweep Commands - Test Equipment Depot GSP-730 User Manual

IEEE488.2 Standard Commands

*IDN?

Description
Query Syntax
Return parameter <string>

Sweep Commands

si
Description
Example
sn
Description
Example
*IDN? ....................................................................................... 87
Queries the manufacturer, model number, serial
number, and firmware version of the instrument.
*IDN?
Returns the instrument identification as a
string in the following format:
GW-INSTEK, GSP-730, XXXXXXXX, V.VV
Manufacturer: GWINSTEK
Model number : GSP-730
Serial number : XXXXXXXX
Firmware version : V.VV
si ................................................................................................. 87
sn ................................................................................................ 87
ts ................................................................................................. 88
Stops the sweep.
si
Continues a stopped sweep.
sn
REMOTE CONTROL
Query
Set
Set
87