Remote Control Function Check - Test Equipment Depot GSP-730 User Manual

Panel operation

Remote Control Function Check

Functionality
check
1. USB Connection:
Connect a USB cable from the PC
to the rear panel USB B port.
RS232 Connection:
Connect an RS232C cable from the
PC to the rear panel RS232 port.
2. Press >Serial Port...[F1]> Serial[F1] to
System
enter the remote configuration.
3. Set the following RS-232 settings using the
arrow keys:
Baud Rate[F1]:
Parity[F2]:
Stop Bit[F3]:
Data[F4]:
Invoke a terminal application such as MTTTY
(Multi-Threaded TTY).
To check the COM port No., see the Device
Manager in the PC.
For WinXP go to;
Control panel → System → Hardware tab.
Run this query command via the terminal after
the instrument has been configured for remote
control (page 80).
*idn?
REMOTE CONTROL
9600, 19200, 38400, 57600,
115200.
None, Even, Odd, Space,
Mark, Multidrop.
1, 1.5, 2.
5, 6, 7, 8
81