Interface Configuration; Configure Remote Interface - Test Equipment Depot GSP-730 User Manual

Interface Configuration

Configure Remote Interface

USB
configuration
RS232
configuration
Description
80
Type A, host
PC side
connector
Rear panel Type B, slave
GSP side
connector
1.1/2.0 (full speed)
Speed
RS232 male port
PC side
connector
RS232 female port
GSP side
connector
9600, 19200, 38400, 57600,
Baud Rate:
115200.
None, Even, Odd, Space, Mark,
Parity:
Multidrop.
1, 1.5, 2.
Stop bit:
5, 6, 7, 8
Data bit:
The GSP-730 can use either the type B USB port
or the RS232 on the rear panel for remote
control.
When using the USB B port, the GSP-730 uses a
USB driver to simulate an RS232 connection
with a PC via USB. It is these RS232 settings
that are configured for remote control.
Before using the USB B port for remote control,
please install the USB driver. See page 20 for
details.
GSP-730 User Manual