Related Manuals for Avaya IP Office 4600 Series
Summary of Contents for Avaya IP Office 4600 Series
- Page 1 IP Office 4600 Series IP Telephone Installation 40DHB0002UKCJ - Issue 5 (08/03/2002)
-
Page 2: Table Of Contents
4600 IP Phone Installation Page ii Contents 4600 IP Phone Installation ..............3 Introduction ..........................3 Installation Requirements......................4 DHCP Installation................5 DHCP Installation Preparation ....................5 DHCP Phone Installation ......................6 User PC Connection ........................7 Additional Notes......................... 7 4600 Series IP Telephone Installation Page ii IP Office... -
Page 3: 4600 Ip Phone Installation
4600 IP Phone Installation Page 3 4600 IP Phone Installation Introduction This guide covers the installation of 4600 series IP telephones on the IP Office. Currently the following 4600 series phones are supported on the IP Office: • 4606 • 4612 •... -
Page 4: Installation Requirements
4600 IP Phone Installation Page 4 Installation Requirements To install a 4600 Series IP Telephone onto IP Office, the following items are required: • Power Socket: A switched 110-240V AC, 50-60Hz, 250-500mA supply socket is required for each IP telephone. •... -
Page 5: Dhcp Installation
DHCP Installation Page 5 DHCP Installation DHCP Installation Preparation This installation process uses the IP Office Control Unit as a DHCP Server and H323 Gatekeeper to assign IP and telephony settings to the 4600 Series IP telephone. It also assumes that the Manager application is used as the TFTP server during installation. -
Page 6: Dhcp Phone Installation
DHCP Installation Page 6 DHCP Phone Installation 1. Connect the 1151A1 Power Unit to a mains power socket and switch on. The green Power On lamp on the Power Unit should come on. 2. Connect the longer LAN cable supplied with the IP telephone from the network LAN socket to the power unit's LINE socket. -
Page 7: User Pc Connection
DHCP Installation Page 7 User PC Connection To simplify the number of LAN connections from the user's location, it is possible to route their PC LAN cable via the 4600 Series IP Telephone. The LAN cable should be connected from the PC to the socket with a PC symbol ( ) at the back of the IP Phone. - Page 8 Lucent Technologies has been transferred or licensed to Avaya. This confidential document is the property of Avaya and without its prior written consent may not be disclosed to a third party nor copied. Any comments or suggestions regarding this document should be sent to "gsspublishing@avaya.com".