Table of Contents
Advertisement
5. COMPONENT IDENTIFICATIONS
NAME
Power terminal block
A
B
Network terminal block
Baud rate setting
C
D
Station No. setting
E
Status indicator LED
F
Power LED
G Configurator jack
Specifications
H
6. INSTALLATION
■ DIN RAIL MOUNTING
Set the body so that its DIN rail adaptor is at the bottom. Pull down the DIN rail
adaptor.
Position the upper hook at the rear side on the DIN rail and push in the lower. Push
back the DIN rail adaptor.
■ WALL MOUNTING
Set the body so that its DIN rail adaptor is at the bottom. Pull down the DIN rail
adaptor.
Refer to "EXTERNAL DIMENSIONS."
A
B
T8
T7
T6
DA
DB
DG FG SLD
FUNCTIONS
For power input
For wiring to CC-Link
SETTING
BAUD RATE
0
156 kbps (factory default)
1
625 kbps
2
2.5 Mbps
3
5 Mbps
4
10 Mbps
Other than 0 – 4
Not valid; L ERR. turns on as a transmission error.
Ver. 1.10: Selectable within 1 – 61. (factory set to: 00)
Ver. 2.00: Selectable within 1 – 64. (factory set to: 00)
ID (color)
FUNCTIONS
L RUN (red)
ON:
Blinking :
OFF:
L ERR. (red)
ON :
Blinking :
OFF:
SD (red)
ON when transmitting
RD (red)
ON when receiving
ID (color)
FUNCTIONS
PWR (green)
ON:
Blinking, high speed:
Blinking, low speed:
2.5 dia. miniature jack; RS-232-C level
Display(s) serial No., model No., etc.
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
C
D
E
F G
H
Normal communication
Transmission data error
Communication down (time-out error)
Transmission data error
Transmission data error
Normal transmission
Abnormality
CC-Link Ver. 1.10
CC-Link Ver. 2.00
Master Version 2.00 with long ON time
Master Version 1.10 with long OFF time
R1C-GH
DIN Rail
35mm wide
DIN Rail Adaptor
EM-5956 Rev.11 P. 5 / 13
Advertisement
Table of Contents
