Tools Required; Inventory List; Item Description - ETI NETCOM ADH Replacement Procedure

ADH NETCOM INLET SOLENOID
MODULE REPLACEMENT
PROCEDURE
This procedure addresses the removal and
replacement of the Inlet Solenoid Module in
an ADH NETCOM Automatic Air
Dehydrator. The first section addresses the
replacement of the Inlet Solenoid Module in
the AC and DC models. The second section,
starting on page 6, addresses the
replacement of the Inlet Solenoid Module in
the ADH NETCOM AC NEMA configuration.
It is recommended to read the entire
procedure prior to beginning work.

INVENTORY LIST

Identify the following items in this kit prior
to beginning work.
Item
Number
1 1
2 2
South Bend, Indiana USA | networketi.com
Part Item
Number Quantity
23270 1
24108 1

TOOLS REQUIRED

The following tools are needed to perform
this procedure:
• 5/16" Nut driver
• Phillips screwdriver
• Small flat blade screwdriver
• Tubing wrench or vacuum tube pliers
Item
Description
Solenoid
Instruction Manual (this document)
3
ADH INSTRUCTION MANUAL | PART NO. 24108 REV B