Page 3
SCOPE The ETI 131-1192-00 Bluetooth Module is used in conjunction with a Palm handheld and ETI’s Commander software to wirelessly setup and troubleshoot an ETI MNPR. This module is to be used for temporary communications (as a cable replacement). It is not intended to part of a permanently installed communications system.
Page 4
4. Start the ETI Commander software. 6. The status line will now indicate that Bluetooth is selected. 7. From the Bluetooth menu, select Setup New 5. Press the menu button (indicated by the arrow) Bluetooth Device. to access the drop down menu, choose “Conn...
Page 5
Unless you want to pair a different module, there should be no need to repeat this setup. 9. Choose the “ETI OPTO” device with the 11. Commander is now ready to be used. Go to the matching serial number and press OK. If you have Parameters screen and press Read.
Need help?
Do you have a question about the 131-1192-00 and is the answer not in the manual?
Questions and answers