Thank You - Culligan Sulfur-Cleer Fiberglass Owner's Manual

Thank You

Welcome To Your New World of Better Living with Culligan Water.
The Culligan High Efficiency Sulfur-Cleer™ 10" fiberglass
and Quadra Hull filters have been tested and certified by
WQA against NSF/ANSI Standard 372, CSA B483.1, and
NSF/ANSI Standard 42 for the effective reduction of iron
up to 1,000 gallons, and NSF/ANSI Standard 42 for the
effective reduction of hydrogen sulfide as verified and
substantiated by test data.
The Culligan High Efficiency Sulfur-Cleer™ 10" fiberglass
and Quadra Hull filters have been certified by IAPMO
R&T against NSF/ANSI 372, CSA B483.1, and NSF/ANSI
Standard 42 for the effective reduction of iron up to 1,000
gallons and NSF/ANSI Standard 42 for the reduction of
hydrogen sulfide as verified and substantiated by test data.
For installations in Massachusetts, Massachusetts
Plumbing Code 248 CMR shall be adhered to.
Consult your licensed plumber for installation of this system.
This system and its installation must comply with state and local regulations.
The use of saddle valves is not permitted.
Congratulations, too, on selecting one of the "first family" of water treatment in the prestigious
Culligan High Efficiency Water Filters. With Culligan's many years of knowledge and experience
in water treatment, you can be confident that the model you selected has been designed and
engineered to provide years of service with a minimum of care and attention.
Some localities have corrosive water. A water filter cannot correct this problem and so its printed
warranty disclaims liability for corrosion of plumbing lines, fixtures or appliances. If you suspect
corrosion, your Culligan Dealer has equipment to control the problem.
5
01023492 F 06/19