Changing Scsi Settings; Selecting The Console; Selecting Boot Options - Bull ESCALA Power7 Series Management Manual
Managing system management services
Hide thumbs
Also See for ESCALA Power7 Series:
- Site and hardware planning (302 pages) ,
- Common service procedures (200 pages) ,
- Manual (184 pages)
Table of Contents
Advertisement
About this task
An example of the Protocol menu follows.
Protocol
Port 1 - 2 PORT Gigabit Et
1. Standard <===
2. IEEE802.3
--------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Changing SCSI settings
You can view and change the addresses of the SCSI controllers attached to your system.
About this task
When you select the Change SCSI Settings option, you can view and change the addresses of the SCSI
controllers attached to your system.
SCSI Utilities
1. Hardware Spin Up Delay
2. Change SCSI Id
--------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Selecting the console
You can select which console to use to display the SMS menus.
About this task
When you select the Select Console option, you can select which console to use to display the SMS
menus. This selection is only for the SMS menus and does not affect the console used by the operating
system.
Follow the instructions that are displayed on the console. The firmware automatically returns to the SMS
main menu after the console is chosen.
Note: If you do not change the console to another device before removing the current console, you must
reattach the current console to change your console selection.
Selecting boot options
You can install or boot a device, configure a boot device order, select the multiboot startup option, or
select the storage area network (SAN) zoning support option.
Un-P1-T9
00096bff616b
X = eXit System Management Services
X = eXit System Management Services
Managing system management services
11
Advertisement
Table of Contents
