Disk Drive Locations And Service Indicators For The 31D/24, And 31T/24 Scsi Disk-Drive Enclosures - Bull ESCALA Power7 E2-700 Manual

Figure 38. Disk drive locations
Related information:
Cabling the 5802 disk subsystem
Disk drive locations and service indicators for the 31D/24, and 31T/24
SCSI disk-drive enclosures
Learn about the disk drive locations and where the service indicators are located for your disk-drive
enclosure.
The availability of disk drive locations depends on the number of SCSI interface cards installed in the
SCSI disk-drive enclosure. If the next available disk drive position is the first slot in a disk-drive
enclosure, such as D21, D26, or D46, look at the disk drive controller to verify that the enclosure is
connected to a SCSI bus port. The controller end of the cable is clearly labeled with the disk-drive
enclosure to which it connects. If the enclosure is not connected to a disk drive controller, you must either
install the disk drive in a different disk-drive enclosure or connect the enclosure to a SCSI bus port on a
disk drive controller. You might need to add a disk drive controller before you can add disk drives to the
expansion unit.
The following figures show the disk drive locations for the front and rear of the 31D/24, and 31T/24
SCSI disk-drive enclosures.
60
Disk drives or solid-state drives for the 02E/4B, 02E/4C, 05F/6B, or 05E/6C