SCSI Controller for Internal Devices
The installation of an additional SCSI controller to manage internal devices requires some
additional operations with respect to any other controller.
Once you have installed the controller, as described in Controller Installation, you need to
use the internal controller cable(s) to connect the internal connector(s) of the controller to
the system bulkhead. This operation requires an overall knowledge of the system SCSI
configuration.
If you are doing this operation on your own, you can find the proper information in the
Maintenance and Service Guide. Otherwise, call your Service Representative for
assistance.
The same applies to the SCSI controller removal.
4-12
Upgrading the System