Installa�On - ROVE R2-4K User Manual

INSTALLATION
The camera comes with the default settings which allows you to
start using your camera right out of the box without changing any
settings. Make sure to format the memory card before first time use.
Installation Position: It is recommended to install ROVE
1
R2-4K at the near of rear view mirror of driver opposite side.
Clean any foreign matter and moisture from the place where
the product will be installed.
Stop the engine where there is some light and in a safe place,
2
and then remove the key.
Attach the ROVE R2-4K to the windshield glass with using
3
the suction mount. Set the camera lens to point directly
forwards to the center when installing it.
NOTE
Make sure that the camera's view is not obstructed by any window
tint or any other objects.
If your vehicle has side curtain airbags please be very careful when
running any cables along your vehicle windows. Ensure you are
not running cable spast any of the airbags as this can prevent the
airbags from deploying.
USER MANUAL
16