Technical Data; Symbols; Use For Intended Purpose; Functional Description - Festool TS 75 EQ Instruction Manual

• Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these
chemicals work in a well ventilated ar-
ea and use approved safety equipment,
such as dust masks that are specially
designed to fi lter out microscopic par-
ticles.

Technical data

Power consumption
No load speed
Max. speed
1
Angele of cut
Depth of cut at:
90°
45°
Saw blade diameter
Saw blade hole diameter
Weight
Protection class
Max. possible speed with faulty electronics.
1

Symbols

V volts
A amperes
Hz hertz
W watt
~ alternating current
n no load speed
0
Class II Construction
rpm/
min revolutions per minute
-1

Use for intended purpose

The hand-operated circular saw TS 75 EQ is de-
signed exclusively for the sawing of wood, wood-like
materials and plastics. With the special saw blades
for aluminium offered by Festool, these machines
can also be used for sawing aluminium.
The machine should not be converted or modifi ed,
e.g. for any other form of use, other than as speci-
fi ed in these operating instructions.
Festool electric power tools must only be installed
on work tables provided by Festool for this pur-
pose. If the tool is installed in another, or self-made,
work table, it can become unstable and result in
serious accidents.
and accidents resulting from incorrect use.
1.1
13 A
1.2
1,350 - 3,550 rpm
4,400 rpm
1.3
0° - 45°
1.4
75 mm (3.0")
1.5
56 mm (2.2")
1.6
210 mm (8.27")
30 mm (1.18")
6.1 kg (13.4 lbs)
1.1
/II
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
The network voltage must conform to the voltage
indicated on the rating plate. A 16 A safety fuse (for
120 V) or a corresponding protective circuit-break-
er is required.
See the following fi gure for connection and dis-
connection of the power cord.
necting or disconnecting the power cord!
2
6
The user shall be liable for damages

Functional description

Protective cover
Cutting depth scale
Cutting depth end stop
Setscrew for angle adjustment
Hexagon socket wrench
Saw table
Switching on and unlocking block
On/Off switch
Guide jaws

Electrical connection

Always switch the tool off before con-
1.7
1.8
1.9