Download  Print this page

Kenwood CH250 Instructions Manual page 4

Quad blade mini chopper
Hide thumbs

Advertisement

124580 Iss 1 FDM10 English_Arabic_Blender template multi Iss 5 28/11/2013 09:42 Page
Direct serve attachment
Never remove the lid until the
G
cutting disc has completely stopped.
Never use your fingers to push food down
G
the feed tube. Always use the pusher
supplied.
Do not use excessive force to push food
G
down the feed tube – you could damage the
attachment.
Avoid contacting moving parts. Keep fingers
G
out of the discharge opening.
Important - UK only
The wires in the cord are coloured
G
as follows:
Green and Yellow = Earth
Blue = Neutral
Brown = Live.
The appliance must be protected by
G
a 3A approved (BS1362) fuse.
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
For non-rewireable plugs the fuse
G
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
G
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
Wash the parts: see 'cleaning'.
key
bowl
2
cord storage
3
power unit
4
'safety' interlock
5
spatula
Food chopper
6
lid
7
speed selector
8
oil feeder cup
9
upper knife blade
bk
lower knife blade
Direct serve attachment (if
supplied)
bl
pusher
bm
direct serve lid
bn
on/off lever
bo
food outlet
bp
reversible slicing/grating disc
bq
direct serve adaptor
4

Advertisement

Table of Contents
loading

  Also See for Kenwood CH250

This manual is also suitable for:

Fdm10